Ropex RESISTRON RES-5010 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 47

Ropex RESISTRON RES-5010 Скачать руководство пользователя страница 11

Accessories and modifications

RESM-5

Page 11

4

Accessories and modifications

A wide range of compatible accessories and peripheral
devices are available for the RESISTRON monitoring
device RESM-5. They allow it to be optimally adapted
to your specific heatsealing application as well as to
your plant's design and operating philosophy.

4.1

Accessories

• The products described below are only a few of the

wide range of accessories available for RESIS-
TRON monitoring devices (



"Accessories" leaflet).

4.2

Modifications (MODs)

Owing to its universal design, the RESISTRON
monitoring device RESM-5 is suitable for a very wide
range of heatsealing applications.
Modifications (MODs) are available for the
RESISTRON

monitoring

device

RESM-5

for

implementing special applications.

MOD 01

Booster

for

low

secondary

voltages

(U

R

= 0.25…16VAC). This modification is necessary,

for example, for very short or low-resistance heat-
sealing bands.

Analog temperature meter ATR-x

For front panel mounting or mounting on a top hat rail (DIN TS35 rail).
Analog indication of the ACTUAL temperature of the heatsealing band in °C. The
meter damping of the unit is optimized for the abrupt temperature changes that occur
in impulse mode.

Line filter LF-xx480

Essential to ensure CE conformity.
Optimized for the RESISTRON monitoring device.

Communication interface CI-USB-1

Interface for connecting a RESISTRON monitoring device with a diagnostic interface
(DIAG) to the PC (USB port). Associated PC visualization software for displaying
setting and configuration data as well as for recording SET and ACTUAL
temperatures in real time.

Monitoring current transformer MSW

For detecting frame short-circuits on the heatsealing band.
Used as an alternative to the standard PEX-W2 / W3 current transformer.

U

R

measurement cable UML-1

Twisted cable for measuring the U

R

voltage.

Suitable for drag chains, contains neither halogens nor silicone.

«
...
9
10
11
12
13
...
»

Содержание RESISTRON RES-5010
















































Отзывы:

Нет отзывов