Ropam elektronik BasicGSM 2, Руководство по установке

Страница: 5 / 83

Page 01
Introduction
© 2017 Ropam Elektronik
1. Introduction
Introduction
Thank you for choosing Ropam Elektronik products and solutions. We hope that our devices will meet
your requirements and will be served reliably for many years. Ropam Elektronik continues to innovate
their products and solutions. With the update function, products can be enhanced with new features
and follow the requirements of modern home and office security systems. We invite you to visit our
website www.ropam.com.pl for information on current versions. If you have any additional questions,
please contact us by phone or email.
This manual applies to products in a given software. Because the operation of the device depends on
the setup of the installer, all functions covered by this option are marked (service).
Properties
BasicGSM 2 / - PS terminals are the successors to the series of earlier BasicGSM modules. The first
is BasicGSM 2 with 12VDC power supply and BasicGSM 2 - PS power supply with built-in buffer battery
support and emergency power supply. New terminals are equipped with the latest GSM modem for 2G
networks and many new features.
The basic features of the BasicGSM 2 series are:
- compact design, smaller dimensions,
- versions for a DIN rail, BasicGSM D4M-2 BasicGSM D4M-PS-2 (width four DIN modules),
- basicGSM-BOX in surface-mounted housing, AT-GSM-MINI90 antenna, anti-tamper protection,
- disconnectable connectors,
- antenna socket SMA,
- nanoSIM slot,
-
microUSB - for programming and updating,
- socket for connecting PSR-ECO-2012 power supply (BasicGSM 2 / -D4M),
- 6 inputs NO/NC (I1-I6)
- 2 inputs NO/NC, GND, +12V, 0-10V, 4..20mA,
- 1 relay output (O1) for controlling eg. a gate,
- 3 OC outputs - protected against short-circuits and overload (0.7A),
- 1 AUX protected output (1A),
- 4 calendar timers, RTC clock, synchronization with GSM network,
- TSR-x temperature sensor support, GSM thermostat,
-
LogicProcessor, logic functions, time relays,
- CALL, SMS, SMTP e-mail notification),
- Remote programming via GPRS (RopamBridge server),
-
dedicated RopamBasic mobile application (Android, IOS) via GPRS and RopamBridge server
(and the current RopamDroid - SMS messaging, Android system),