Ropam elektronik BasicGSM 2, Руководство по установке

Страница: 22 / 83

Page 18
System configuration
© 2017 Ropam Elektronik
4. System configuration
Programming and configuration of the system (module) can be performed:
• from the BasicGSM Manager; local connection the whole system and functions,
• from the BasicGSM Manager; GPRS connection - the whole system and functions,
• from the SMS command level; selected functions.
System configuration: BasicGSM Manager.
BasicGSM Manager is designed for use on PCs running WINDOWS XP / VISTA / 7/8/10.
Communication between BasicGSM Manager and Ropam devices is via a USB port using
communication cables. BasicGSM Manager allows you to configure devices and update firmware
versions (firmware upgrade).
Description of the program toolbar.
The program has a text-graphic menu. Unauthorized operations or features for this type of device are
displayed as inactive (gray: icons or captions). Communication functions are only available after the
USB port is properly configured and communication with the module is started.
Local configuration via USB port.
The module is configured via USB. In order to obtain the configuration process, follow these steps.
1. Turn off the module power.
2. Connect the communication cable to the micro USB connector on the module board.
3. Connect the cable to the port on the service computer (USB).
4. Start the service computer and BasicGSM Manager.
5. Turn on the module power.
6. In BasicGSM Manager:
- enter the PASSWORD in the COMMUNICATION OPTIONS (factory 111111), if no password or its
incompatibility is possible, only SAVE to the module and update the firmware