ROPA Tiger 6 Скачать руководство пользователя

Страница: 470 / 564

Maintenance and Service

Battery maintenance

470 / 564

7.17

Battery maintenance

Check the acid level in the vehicle batteries every 2 weeks during the season.

Battery case

WARNING

Risk of burns.

Battery acid may cause dangerous burns on the skin and within the respiratory sys-

tem.
– When handling acid batteries, always wear sufficient protective clothing (protective

goggles, acid-resistant gloves, apron).

– Avoid skin contact with battery acid.

– Avoid inhaling acid vapours.

– When handling batteries, make sure that there is sufficient ventilation in the work-

place.

– In case of skin contact with battery acid, immediately flush the skin sections con-

cerned with lots of water. Then immediately consult a doctor.

Where necessary, refill with lots of distilled water until the acid level is 10 mm above

the upper level of the plates.
This can be done quickly and safely with the ROPA battery cell filler with automatic

level stop (ROPA item no. 015036400).

Содержание Tiger 6





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Tiger 6

Отзывы:

Похожие инструкции для Tiger 6

Бренды по названию

Популярные бренды

ROPA Tiger 6, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание Tiger 6

Отзывы:

Похожие инструкции для Tiger 6

Бренды по названию

Популярные бренды