ROPA Tiger 6 Скачать руководство пользователя

Страница: 347 / 564

Operation

Video system

347 / 564

6.24

Video system

WARNING

The video system is solely for assistance and may show obstacles in a distorted per-

spective, incorrectly or not at all. It is not a substitute for your attention. The video sys-

tem cannot display all objects that are very close and/or above the rear view camera.

It does not warn you about collision, people or objects. You are responsible for the

safety and must pay attention to your immediate surroundings. This applies not only

to rear but also to the front and side areas around the machine. Otherwise you might

not see people or objects, and continue driving, causing injures to people or damage

to property and the machine.

The video system could either fail or work incorrectly, when

it rains heavily, snows or is foggy.

the camera is exposed to very strong white light. White streaks may appear on the

screen.

the camera lens is dirty or covered.

The cameras are maintenance-free. When the image quality deteriorates, you should

clean the lens cover using a soft, clean and lightly moistened cloth. During cleaning,

make sure that you do not scratch the lens cover.

6.24.1

Rear view camera

The machine is equipped as standard with a video rear view camera. This camera is

located above at the rear of the vehicle and serves to provide a better view when dri-

ving backward. The rear view camera is a visual parking aid, it is automatically acti-

vated as soon as you move backwards.

Rear view camera

Содержание Tiger 6





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Tiger 6

Отзывы:

Похожие инструкции для Tiger 6

Бренды по названию

Популярные бренды

ROPA Tiger 6, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание Tiger 6

Отзывы:

Похожие инструкции для Tiger 6

Бренды по названию

Популярные бренды