ROPA Tiger 6, Оригинальное руководство по эксплуатации

Страница: 320 / 564

Operation
Bunker
320 / 564
6.18.6 Machine automatic folding out/in
With the help of automatic folding the bunker can be set into operating or transport
position.
WARNING
Hazard of extremely severe injuries.
– Make sure, that nobody stands in the hazard zones when the machine is started.
The automatic folding performs the following movements of the machine during
folding out:
1 Folding elevator, all side and rear bunker grids out
2 Folding bunker bars and the front bunker wall out
3 Folding unload conveyor articulation parts out
4 Raising bunker auger front and rear
You start the automatic folding pressing the service key (
24 ) and simultaneously
engaging the analogue rocker ( 40 ) outward for operating position or inward for trans-
port position.
24
40
ATTENTION
Before folding into the transport position the bunker must be completely emptied!
The automatic folding performs the following movements of the machine during
folding in:
1 Lower bunker auger front and rear
2 Fold unloading conveyor articulation parts in
3 Fold bunker bar and the front bunker wall in
4 Fold elevator, all side and rear bunker grids in
– Check visually if the machine is really in the transport position. If not, put the
machine into the transport position manually.
– Clean the machine so, that all lighting and warning devices are visible, the allowed
total weight is not exceeded and pollution of public roads is avoided.