Ronde & Schwarz CLIPSTER, Руководство по оборудованию, Страница: 93 / 98

Appendix

Conformity Declarations
93 CLIPSTER | Hardware Guide | Hardware Generation V+
Rohde & Schwarz DVS GmbH
FCC Compliance Statement
Rohde & Schwarz DVS GmbH herewith declares that the
following equipment has been tested according to the applying
valid FCC regulations:
CLIPSTER
FCC Notice This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equip-
ment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at
his own expense.
Note Connecting this device to peripheral devices that do not comply
with Class A requirements or using an unshielded peripheral data
cable could also result in harmful interference to radio or televi-
sion reception. The user is cautioned that any changes or modifi-
cations not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equip-
ment. To ensure that the use of this product does not contribute
to interference, it is necessary to use shielded I/O cables.