Ronde & Schwarz CLIPSTER, Руководство по оборудованию

Страница: 48 / 98

Operation

Installing the System
48 CLIPSTER | Hardware Guide | Hardware Generation V+
Rohde & Schwarz DVS GmbH
Installing the System
Perform the following steps:
1. Unpack the R&S DVS system and its accessories.
2. Check your delivery and compare it with the delivery note
included in the package on an extra sheet of paper. In case of
missing items, please contact your local vendor or
Rohde &Schwarz DVS GmbH immediately.
3. Place the system on a firm, flat surface within reach of a
power outlet or mount it in a rack. For proper air circulation
and cooling make sure the ventilation holes are not covered.
4. Connect at least the following computer peripherals:

mouse

keyboard and
 a monitor that is operable at a resolution of at least 1024 ×
768 pixels (default manufacturing setting).
5. Connect any other peripheral computer and video equipment.
For an overview of the panels and connectors at the system’s
rear, see section “Overview of the Rear” on page 31.
6. Connect the power cable(s) to the system.
Warranty Claims
To make warranty claims you have to keep
the original packing and use it in case of a
return transportation
Ventilation
When installing the DVS system in a rack,
take care that warmed up air is conducted to
the rear of the rack and properly vented away.
The recommended resolution to run the R&S DVS soft-
ware is 1600 × 1200 pixels.