Ronde & Schwarz CLIPSTER, Руководство по оборудованию

Страница: 26 / 98

Overview

Overview of the Front
26 CLIPSTER | Hardware Guide | Hardware Generation V+
Rohde & Schwarz DVS GmbH
SSD LEDs and the SSD disk array
Starting from the left, the first four LEDs display the accesses to
the top row of SSD disks (see section “SSD Disk Array” on
page 27), the second four LEDs show the state of the SSD disks
of the second row, and so on.
Faceplate
The faceplate covers the SSD disks of the SSD disk array.
Overview of the faceplate
The faceplate is built with an integrated backlit R&S logo which
indicates the state of the system, i.e. its power-on status: If the
R&S logo is illuminated, the power is turned on; if not, the power
is turned off.
The top side of the faceplate is hinge-fastened, while its bottom
side is fixed with magnets. If you need access to one of the SSD
disks, for example, to replace it, you have to lift the faceplate:
LEDs:
SSD disks:
A
1
B C D
2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
A:
B:
C:
D:
faceplate backlit R&S logo