Remote Commands
R&S
®
FPL1000
941
User Manual 1178.3370.02 ─ 11
•
Line 1: "Heading"
•
Line 2: "Meas Type"
•
Line 3: "Equipment under Test"
•
Line 4: "Manufacturer"
•
Line 5: "OP Condition"
•
Line 6: "Test Spec"
Make sure that the title string is not too long, because strings
that are too long could mess up the layout of the report.
Example:
HCOP:TREP:ITEM:HEAD:LINE3:TITL 'Device under
Test'
Renames the third title into "Device under Test".
Manual operation:
See
HCOPy:TREPort:ITEM:HEADer:STATe
<State>
This command includes or excludes the complete set of measurement information from
the test report.
Parameters:
<State>
ON | OFF
*RST:
ON
Example:
HCOP:TREP:ITEM:HEAD:STAT ON
Includes the measurement information in the test report.
Manual operation:
See
HCOPy:TREPort:ITEM:LIST?
[<ChannelType>]
This command queries the selected information to be included in the test report for a
specific channel type.
Parameters:
<ChannelType>
Selects the channel type that you want to query the test report
configuration for.
When you omit the parameter, the command returns the configu-
ration of the currently selected channel.
Example:
HCOP:TREP:ITEM:LIST? SAN
Queries the items that are included in the test reports of the
Spectrum application.
Usage:
Query only
Table 10-9: Available <ChannelTypes>
<ChannelType>
SAN
Spectrum
Managing Settings and Results
