Ronde & Schwarz 1304.0004K03, Руководство пользователя

Страница: 849 / 1071

Remote Commands
R&S
®
FPL1000
849 User Manual 1178.3370.02 ─ 11
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt
This command moves a delta marker to the next higher minimum value.
The search includes only measurement values to the right of the current marker posi-
tion.
In the spectrogram, the command moves a marker horizontally to the minimum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
.
Window
<m> Marker
Manual operation: See "Search Next Minimum" on page 365
10.8.8.5 Retrieving Marker Results
The following commands are used to retrieve the results of markers.
You can use the marker values to position the center frequency or reference level
directly using the following commands:
●
CALCulate<n>:MARKer<m>:FUNCtion:CENTer
on page 749
●
CALCulate<n>:MARKer<m>:FUNCtion:REFerence
on page 766
Useful commands for retrieving results described elsewhere:
●
CALCulate<n>:DELTamarker<m>:X
on page 835
●
CALCulate<n>:MARKer<m>:X
on page 837
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:COUNt?
on page 863
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X?
on page 865
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:Y?
on page 866
●
CALCulate<n>:MARKer<m>:FUNCtion:NOISe:RESult?
on page 866
●
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:RESult?
on page 868
●
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer:RESult?
on page 873
●
CALCulate<n>:MARKer<m>:FUNCtion:BPOWer:RESult?
on page 871
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult?
on page 876
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:FREQuency?
on page 875
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:QFACtor?
on page 875
●
CALCulate<n>:MARKer<m>:COUNt:FREQuency?
on page 878
Setting Basic Spectrum RF Measurement Parameters