Remote Commands
R&S
®
FPL1000
742
User Manual 1178.3370.02 ─ 11
Example:
LAY:MOVE '1','3',REPL
Replaces the window named '3' by window 1. Window 3 is
deleted.
Usage:
Setting only
LAYout:REMove[:WINDow]
<WindowName>
This command removes a window from the display in the active channel.
Setting parameters:
<WindowName>
String containing the name of the window. In the default state,
the name of the window is its index.
Example:
LAY:REM '2'
Removes the result display in the window named '2'.
Usage:
Setting only
LAYout:REPLace[:WINDow]
<WindowName>,<WindowType>
This command replaces the window type (for example from "Diagram" to "Result Sum-
mary") of an already existing window in the active channel setup while keeping its posi-
tion, index and window name.
To add a new window, use the
command.
Setting parameters:
<WindowName>
String containing the name of the existing window.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows in the active
channel setup, use the
query.
<WindowType>
Type of result display you want to use in the existing window.
See
on page 739 for a list of availa-
ble window types.
Example:
LAY:REPL:WIND '1',MTAB
Replaces the result display in window 1 with a marker table.
Usage:
Setting only
LAYout:SPLitter
<Index1>, <Index2>, <Position>
This command changes the position of a splitter and thus controls the size of the win-
dows on each side of the splitter.
Note that windows must have a certain minimum size. If the position you define con-
flicts with the minimum size of any of the affected windows, the command will not work,
but does not return an error.
Remote Commands for Result Displays
