manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, Руководство пользователя

Поделиться
Скачать
Ronde & Schwarz 1304.0004K03 Скачать руководство пользователя страница 66

Getting Started

R&S

®

FPL1000

66

User Manual 1178.3370.02 ─ 11

Marker information in marker table

In addition to the marker information displayed within the diagram grid, a separate
marker table may be displayed beneath the diagram. This table provides the following
information for all active markers:

"Type"

Marker type: N (normal), D (delta), T (temporary, internal), PWR (power sensor)

"Ref"

Reference (for delta markers)

"Trc"

Trace to which the marker is assigned

"X-value"

X-value of the marker

"Y-Value"

Y-value of the marker

"Function"

Activated marker or measurement function

"Function Result"

Result of the active marker or measurement function

The functions are indicated with the following abbreviations:

"FXD"

Fixed reference marker

"Phase Noise"

Phase noise measurement

"Signal Count"

Signal count

"TRK"

Signal tracking

"Noise Meas"

Noise measurement

"MDepth"

AM modulation depth

"TOI"

Third order intercept measurement

4.4.1.4

 

Frequency and Span Information in Diagram Footer

The information in the diagram footer (beneath the diagram) depends on the current
application, measurement, and result display.

For a default measurement in the Spectrum mode, the Diagram result display contains
the following information, for example:

Label

Information

CF

Center frequency

Span

Frequency span (frequency domain display)

ms/

Time per division (time domain display)

Pts

Number of sweep points or (rounded) number of currently displayed points in zoom
mode

Operating the Instrument

Содержание 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды