Ronde & Schwarz 1304.0004K03, Руководство пользователя

Страница: 472 / 1071

Data Management
R&S
®
FPL1000
472 User Manual 1178.3370.02 ─ 11
Startup Recall
Activates or deactivates the startup recall function. If activated, the settings stored in
the selected file are loaded each time the instrument is started or preset. If deactivated,
the default settings are loaded.
Note that only instrument settings files can be selected for the startup recall function,
not "Channel" files.
Remote command:
MMEMory:LOAD:AUTO
on page 921
Selecting Storage Location - Drive/ Path/ Files
Select the storage location of the file on the instrument or an external drive.
The default storage location for the SEM settings files is:
C:\ProgramData\Rohde-Schwarz\ZNL-FPL\sem_std
.
Remote command:
MMEMory:CATalog
on page 912
File Name
Contains the name of the data file without the path or extension.
By default, the name of a user file consists of a base name followed by an underscore.
Multiple files with the same base name are extended by three numbers, e.g.
limit_lines_005
.
File names must be compatible with the Windows conventions for file names. In partic-
ular, they must not contain special characters such as ":", "*", "?".
For details on the filename and location, see Chapter 7.2.2.2, "Storage Location and
Filename" , on page 468.
Comment
An optional description for the data file. A maximum of 60 characters can be displayed.
Remote command:
MMEMory:COMMent
on page 913
7.2.3 How to Save and Load Instrument Settings
Instrument settings can be saved to a file and loaded again later, so that you can
repeat the measurement with the same settings. Optionally, user-defined measurement
settings can automatically be restored each time you start or preset the instrument.
To save and recall instrument settings using the Quick Save function
1. Select the "Save" icon from the toolbar.
2. Select whether the instrument settings for all "Channel"s are stored, or only those
for the current "Channel".
3. Select one of the save sets in which the settings are stored ("QuickSaveX").
Storing and Recalling Instrument Settings and Measurement Data