Ronde & Schwarz 1304.0004K03, Руководство пользователя

Страница: 470 / 1071

Data Management
R&S
®
FPL1000
470 User Manual 1178.3370.02 ─ 11
File Name
Contains the name of the data file without the path or extension.
By default, the name of a user file consists of a base name followed by an underscore.
Multiple files with the same base name are extended by three numbers, e.g.
limit_lines_005
.
File names must be compatible with the Windows conventions for file names. In partic-
ular, they must not contain special characters such as ":", "*", "?".
For details on the filename and location, see Chapter 7.2.2.2, "Storage Location and
Filename" , on page 468.
Comment
An optional description for the data file. A maximum of 60 characters can be displayed.
Remote command:
MMEMory:COMMent
on page 913
File Explorer
Opens the Microsoft Windows File Explorer.
Remote command:
not supported
File Type
Determines whether the global instrument settings with all "Channel"s are stored or
recalled, or the current "Channel" settings only.
Items:
Defines which data and settings are stored or are recalled. Depending on the "File
Type", either channel setups only, or global settings are available. Which items are
available also depends on the installed options (see also
Chapter 7.2.2.1, "Stored Data
Types" , on page 468).
Remote command:
MMEMory:SELect[:ITEM]:ALL
on page 917
MMEMory:SELect[:ITEM]:DEFault
on page 918
MMEMory:SELect[:ITEM]:NONE
on page 919
MMEMory:SELect[:ITEM]:HWSettings
on page 918
MMEMory:SELect[:ITEM]:LINes:ALL
on page 919
MMEMory:SELect[:ITEM]:SCData
on page 919
MMEMory:SELect[:ITEM]:SGRam
on page 920
MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive]
on page 920
MMEMory:SELect[:ITEM]:TRANsducer:ALL
on page 920
Save File
Saves the settings file with the defined filename.
Remote command:
MMEMory:STORe<1|2>:STATe
on page 923
MMEMory:STORe<1|2>:STATe:NEXT
on page 924
Storing and Recalling Instrument Settings and Measurement Data