Replacing the Batteries
This organizer uses two CR2025, 3-volt lithium batteries.
Before you follow these steps you should have a small
Phillips screwdriver and the new batteries at hand.
Warning! When no batteries are installed, this organizer will
save your information for only about 30 seconds. So quickly
install the new batteries when you remove the old ones.
1. Turn off the organizer and turn it over.
2. With the Phillips screwdriver, remove the two screws
at the top of the battery cover and then remove the lid.
Do not remove the screws at the sides of the organizer.
3. Remove the old batteries and quickly replace them with
the new batteries, with their plus (+) signs facing you.
4. Replace the battery cover.
Warning! If
RESET? appears when you next turn on
the organizer, do not press ENTER unless you want to
reset the organizer and erase all your information (see
below).
To Reset the Organizer
Warning! Resetting the organizer permanently erases all the
information entered in it. Perform a reset only when you want
to erase and lose all your information.
1. If needed, turn the organizer on.
2. Using the pointed end of a paper clip, press the recessed
reset button on the back of the organizer.
RESET? should appear on the screen.
3. Press ENTER to reset the organizer. Or press any
other key to cancel the reset.
17
