MIXMAX6 RM64
Owners Manual
RM64 MIXMAX6
The ROLLS RM64 MIXMAX6 is a breakthrough in size/performance in an audio mixer, it is a full function
console 6 channel mixer in a single space 19” rack chassis. It is intended for sound reinforcement, studio, choir,
and other applications where high channel to size ratio is desirable. The RM64 is intended for professional ap-
plications and has socketed IC’s, double sided circuit board and painted steel chassis. It has 6 microphone XLR
and 6 line 1/4” phone inputs. The mike inputs have individual 12V phantom power switches. This manual as-
sumes some familiarity with audio mixers, if the features, knobs or jacks seem unclear please contact the dealer
for help.
Features
> Full function 6 channel console mixer in 1 rack space
> 6 XLR mike inputs and 6 1/4” line input jacks
> Individual phantom power switches for each XLR
> Monitor, effects send and Pan pots on each channel
> Treble and bass tone controls for each channel
> R & L Master volumes and FX Return master channel
> Standard 19” X 1.75” EIA rack chassis
Front panel controls
VOLUME 1 - 6, These are the channel volume controls and adjust the volume sent to the tone controls, Pan pot,
and FX send
MONITOR - This is the monitor send volume for each channel and are pre-fade, these are all mixed and sent to
the monitor out jack on the rear panel.
BASS - controls the boost or cut of frequencies below 400 Hz for each channel.
TREBLE - controls the boost or cut of frequencies above 400 Hz for each channel.
PAN - sends the channel signal to right, left or both.
FX SEND - This is the channel signal with tone and volume, summed together and sent to the FX SEND jack
on the rear panel to be input to reverb, chorus, etc.
FX RETURN - this is the return from any effects used with the FX SEND signal and is used to adjust the master
effects level.
MASTER VOLUME, RIGHT - LEFT - are for adjusting the main stereo output level for the unit and set the
overall level for everything except the monitor signal.
Rear Panel Jacks
CHANNEL MIC & LINE - are the inputs for each channel and are mixed, both may be used at once, but of
course they will have the same volume controls.
PHANTOM POWER - are the switches for turning on the microphone power for the XLR inputs, and are num-
bered for the channel they are assigned to. Down is on, up off.
AUX BUSS IN - is a TRS stereo input to the main mix buss and may be used as an auxiliary stereo input of for
joining two RM64’s together.
FX SEND - is the output to external effects units.
FX RETURN - is the input from the external effects units.
MONITOR OUT - goes to an auxiliary amplifier or monitoring system for the sound room, performers, etc..
RIGHT OUT, LEFT OUT - are the main outputs to the EQ, power amp, etc..
Содержание RM64OLD
Страница 3: ...SCHEMATIC...
