Page. 7
Easy Spring Ultra Skyline
Installation
Manual | v2.0
2021 ©Copyright All Rights Reserved Rollease Acmeda
SECTION B | INSTALLATION
PART C – PRETENSION CHECKS
STEP 1 – CHECK FUNCTIONALITY OF PRE-TENSIONED SHADE
i) PULL Bottom Rail down to
bottom location
Pull
Proceed To Part D
MAX 33mm (1.3”)
ii) Shade will raise within range
indicated below to be locked and
provide a ‘Release Allowance’ (for
raising the shade)
iii) TUG Bottom Rail
(Shade will automatically rise)
If Bottom Rail raises at the desired
speed, the correct number of pre-
turns have been assigned.
If Shade stops midway or slows
significantly, insufficient pre-turns
have been applied.
Pre-turns to be added
If Shade operates too fast, too
many pre-turns have been applied.
NOTE: As limits are not
set, ensure Bottom Rail
is controlled so shade
doesn’t crash into structure
and damage fabric .
Tug
Limit Position
