7
| Automate™ Programming Instructions | ARC™ Venetian Tilt Motor
ROLLEASE ACMEDA
3.1 Motor State Test
3
P1 BUTTON FUNCTIONS
Hold
P1
Activate Pairing
Mode
Motor Response
Approx
.
Approx.
P1
Press
Condition
Function Achieved
Visual
Feedback
Audible
Feedback
Function Described
Short
Press
then
Release
(<2 sec)
If limit is NOT set
None
No Action
None
No Action
If limits are set
Operational control
of motor, run to
limit. Stop if running
Motor runs
None
Operational control
of motor after pairing
and limit setting is
completed first time
If motor is in
“Sleep Mode” &
limits are set
(Refer to Sec.10)
Wake and control
Motor
wakes and
runs in a
direction
None
Motor is restored from
Sleep mode and RF
control is active
This table describes the function of a short
P1
button press/release(<2 seconds) depending on current motor
configuration.
3.2 Motor Configuration Options
The
P1
Button is utilized to administer motor configuration as described below and beginning in Section 4.
Sleep Mode
Approx
.
Motor Response
Reverse
Direction
P1
Motor Response
Motor Response
RELEASE
P1
RELEASE
P1
RELEASE
P1
Settings
Approx.
Reset To Factory