background image

8

Playing the XPS-30

Recalling a Favorite

1. 

Press the [FAVORITE] button to make it light.

2. 

Press the [0]–[9] button to select a favorite.

Switching Favorite Banks

1. 

Press the [BANK] button to make it light.

The button from [0] to [9] that corresponds to the currently selected bank blinks.

2. 

Press the [0]–[9] button to select a bank.

Viewing or Removing a Favorite

1. 

Hold down the [SHIFT] button and press the [FAVORITE] button.

The FAVORITE UTILITY screen appears.

You can perform the following operations in the FAVORITE UTILITY screen.

Controller

Explanation

[

K

] [

J

] buttons

Switch the favorite bank.

[

H

] [

I

] buttons

Select a favorite.

[ENTER] button

Removes the selected favorite.

When a confirmation screen appears, press the [ENTER] button once 

again.

If you decide not to remove it, press the [EXIT] button.

2. 

Press the [EXIT] button to exit the FAVORITE UTILITY screen.

Playing Arpeggios (ARPEGGIO)

The arpeggiator is a function that automatically produces an arpeggio based on the 

keys that you press.

 

* The arpeggio settings cannot be saved.

1. 

Press the [ARPEGGIO] button to make it light.

The ARPEGGIO screen appears.

2. 

Play a chord on the keyboard.

An arpeggio consisting of the notes you hold down starts playing.

MEMO

 

5

If “Arp Hold” is “ON,” the arpeggio continues playing even after you release the 

keyboard.

 

5

If you hold down the [SHIFT] button and press the [ARPEGGIO] button, the 

ARPEGGIO screen appears with Arp Hold turned on.

3. 

To turn off this function, press the [ARPEGGIO] button once again to make it 

go dark.

Select an Arpeggio Style

1. 

Press the [ARPEGGIO] button to make it light.

The ARPEGGIO screen appears.

2. 

Move the cursor to “STYLE,” and use the value dial to select a style.

Value

001–128

Editing Arpeggios

1. 

Press the [ARPEGGIO] button to make it light.

The ARPEGGIO screen appears.

2. 

Move the cursor to the item that you want to edit, and use the value dial to 

edit the setting.

3. 

Press the [EXIT] button to exit the ARPEGGIO screen.

MEMO

For details on the parameters that you can edit in the ARPEGGIO screen, refer to 

“Parameter Guide (English)” (PDF).

Performing with Voice from a Mic

You can input a voice from a mic connected to the rear panel MIC IN jack, and 

perform using a voice.

Microphone

 

5

To adjust the input volume from the mic, use the rear panel MIC [LEVEL] knob. 

Adjust the knob so that the sound from the mic is not distorted.

 

5

To adjust the volume balance between the mic sound and your performance, 

use the top panel [MIC IN] level slider.

Using the Vocoder/Auto Pitch

A “vocoder” is an effect that is typically applied to a human voice. By sending 

a human voice through a vocoder, you can give it an unexpressive robot-like 

character. The pitch is controlled by playing the keyboard.
“Auto Pitch” sounds suppress pitch irregularity, producing a pitch-corrected sound. 

By applying a stair-step constraint to pitch change, this creates a mechanical effect.

 

5

The preset bank (PRST) contains 10 vocoder settings and 10 auto-pitch settings.

1. 

Press the [VOCODER/AUTO PITCH] button to make it 

light.

The VOCODER/AUTO-PITCH screen appears.

2. 

Move the cursor to bank, and use the value dial to select a “PRST” or “USER.”

3. 

Move the cursor to the number, and use the value dial to select a vocoder 

or auto-pitch setting.

PRST

001–010

Vocoder settings

011–020

Auto-pitch settings

USER

501–520

User bank

4. 

While playing the keyboard, vocalize into the microphone.

If you’ve selected an Auto Pitch, there’s no need to play the keyboard.

5. 

To turn off this function, press the [VOCODER/AUTO PITCH] button once 

again to make it go dark.

MEMO

You can make detailed adjustments to the vocoder or auto-pitch settings. For 

details, refer to “Parameter Guide (English)” (PDF).

Содержание XPS-30

























Отзывы: