Roland VS-82H, Руководство пользователя

Страница: 14 / 40

14
Connecting External Equipment
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
* Provide cable and adapter plugs to match the connector configuration on the equipment you’re using.
Connecting Video Source/Output Equipment
After making the connections, make the settings for the type of incoming video signals on video channels 1 through 8 (p. 19).
Video cameras, DVD players, etc.
Displays, projectors, etc.
HDMI
input connector
Component output
connectors Composite output
connector S-Video output
connector
Analog RGB
output connector
HDMI output
connector
* For the connector specifications of the analog video input connectors (D-Sub
15-pin), refer to “Analog video INPUT connectors” (p. 32).
* Simultaneously outputting video from both the HDMI OUTPUT connector and
the HDBaseT OUTPUT connector on the same channel is not possible (p. 21).
* When making a connection to an HDBaseT OUTPUT connector, use a Cat 5e
(Category 5e) or later shielded LAN cable.
XS-84H
HDBaseT transmitter, Displays,
projectors, etc.
HDBaseT
input connector
Blue Blue (C) Red Green (Y) Green
Computer
Video source
equipment
Video output equipment
Preview monitor Video output equipment
Preview monitor
Green