VS-700C Console System Program Version 1.31
This system program updates your VS-700C Console to the latest version 1.31.
Checking the version
Before proceeding to the download, follow the instructions below to check the version.
1. Turn off the power of the VS-700C.
2. Turn on the switch "8" (move it upward) at SETTING on the rear panel to enter the update mode.
3. Turn on the power again.
4. Check the versions of VS-700C shown on the LCD display.
*No update required if the version was 1.31 or later.
5. Turn off the power then turn off the switch "8" (move it downward) on the rear panel.
Update history
Ver.1.31
Fixed the phenomenon that touch sense of faders might reduce sensitivity on Ver.1.30.
Ver.1.30
*VS-700C driver Ver.2.0.0 or later is required for Windows.
*VS-700C driver Ver.1.0.0 or later is required for Mac OS X.
Lower latency available. Super low latency and high stability has brought by newly introduced "VS
STREAMING" technology.
Things to prepare
Following items will be required to update the VS-700C to the latest version.
VS-700C
Windows or Mac with the system requirements, VS-700C driver installed.
A USB cable
Caution when performing the update ( IMPORTANT !! )
Never power-off your VS-700C while the update is in progress!
If a power failure or similar accident occurs during the update process, the VS-700C won’t be able to
start up in normal operating mode. This will require servicing, so you will need to contact Roland service
center near you if this occurs.
Downloading and expanding the archive
Download the "vs700c_sysw_v131.zip" for Windows or "vs700c_sysm_v131.zip" for Mac to the desktop or
any location. Downloaded file is an archive file in zip format. After expanding the archive, the folder
"vs700c_sys_v131" will be available, which contains system update files "p00001.mid", "p00002.mid" and
"UpdSMF" simple SMF player application.
