Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 95 | Manualshive

Страница: 95 / 282

Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 95

95

Chapter 6 Mixer Channel Strip Detail

Chapter 6

Snd (Insert Send Level)

This adjusts the level of signal (-42 dB to +6 dB) sent to the
effect. The default setting is 0 dB.

Rtn (Insert Return Level)

This adjusts the level of signal (-42 dB to +6 dB) returned
from the effect. The default setting is 0 dB.

[F4 (Ef4In)] Effect 4 Insert

After pressing [F4 (Ef4In)], or moving the cursor to the
EFXIns area, press [ENTER].

EFX4 (Effect Insert Switch)

This connects the effect in the Master Block mixer section.

Off:

The effect is not inserted.

Ins:

The stereo effect is inserted into the Master Block.

* When Ins is selected, that effect cannot be used on any mixer

channel.

If the name of an input or track appears as the Insert

Switch setting, the effect is already inserted in the displayed
input or track. You will need to select the input or track that is
using that effect and turn its Effect Insert Switch off.

Snd (Insert Send Level)

This adjusts the level of signal (-42 dB to +6 dB) sent to the
effect. The default setting is 0 dB.

Rtn (Insert Return Level)

This adjusts the level of signal (-42 dB to +6 dB) returned
from the effect. The default setting is 0 dB.

[F5 (DIR)] DIRECT OUT

This selects tracks to be assigned as Direct Outputs.

Off:

Direct out is not used.

1-8:

Tracks 1-8 are output from the analog output jacks 1-8. When
DIRECT OUT is used, the MASTER, MONITOR and AUX
jacks are used for the direct track outputs. The signals at each
of the DIGITAL OUT connectors can be set as usual.

Track 1:

MASTER jack (L)

Track 2:

MASTER jack (R)

Track 3:

AUX A jack (L)

Track 4:

AUX A jack (R)

Track 5:

AUX B jack (L)

Track 6:

AUX B jack (R)

Track 7:

MONITOR jack (L)

Track 8:

MONITOR jack (R)

9-16:

Tracks 9-16 are output from the analog output jacks 1-8.
When DIRECT OUT is used, the MASTER, MONITOR and
AUX jacks are used for the direct track outputs. The signals
at each of the DIGITAL OUT connectors can be set as usual.

Track 9:

MASTER jack (L)

Track 10:

MASTER jack (R)

Track 11:

AUX A jack (L)

Track 12:

AUX A jack (R)

Track 13:

AUX B jack (L)

Track 14:

AUX B jack (R)

Track 15:

MONITOR jack (L)

Track 16:

MONITOR jack (R)

[F1 (EFX1)] Effect 1 Master Send

Master Block settings for the EFFECT 1 Bus.

Level

Sets the master send level (0-127) of the EFFECT 1 Bus.

Panning

Sets the overall panning (L63-R63) of the EFFECT 1 Send.

[F2 (EFX2)] Effect 2 Master Send

Master Block settings for the EFFECT 2 Bus.

Level

Sets the master send level (0-127) of the EFFECT 2 Bus.

Panning

Sets the overall panning (L63-R63) of the EFFECT 2 Send.

[F3 (EFX3)] Effect 3 Master Send

Master Block settings for the EFFECT 3 Bus.

Level

Sets the master send level (0-127) of the EFFECT 3 Bus.

Panning

Sets the overall panning (L63-R63) of the EFFECT 3 Send.

[F4 (EFX4)] Effect 4 Master Send

Master Block settings for the EFFECT 4 Bus.

Level

Sets the master send level (0-127) of the EFFECT 4 Bus.

«
...
93
94
95
96
97
...
»

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов