Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 82

Страница: 82 / 282

Chapter 5 Using the Digital Mixer

fig.11-43

Copying Mixer Settings

You can copy mixer settings—equalizer settings and levels—

from another channel to the channel currently shown in the

Channel Edit page.

The following settings can be copied.

Equalizer

EQ low freq

EQ low gain

EQ mid freq

EQ mid gain

EQ mid Q

EQ high freq

EQ high gain

Level

ATT

Phase

EFX1 insert send level

EFX1 insert return level

EFX2 insert send level

EFX2 insert return level

EFX3 insert send level

EFX3 insert return level

EFX4 insert send level

EFX4 insert return level

Fader

MASTER send pan

EFX1 send level

EFX1 send pan

EFX2 send level

EFX2 send pan

EFX3/AUX1 send level

EFX3/AUX1 send pan

EFX4/AUX2 send level

EFX4/AUX2 send pan

AUX/AUX3 send level

AUX/AUX3 send pan

Press [SELECT)] for the copy-destination channel.

Press [PAGE] so that [F5] indicates “Copy,” and then
press [F5 (Copy)].

Turn the TIME/VALUE dial to select the copy-source
channel.

If the channel-linking is off for the copy-destination channel, the

channel-linking of the copy-source channel will also be considered

to be off even though it may actually be on, and only the settings of

individual channels will be copied. Similarly, when channel-linking

is on for the copy-destination channel, channel-linking of the copy-

source channel will also be considered to be on, even though it may

actually be off, and the settings of both channels will be copied.

Use the function buttons to select the settings to will be

copied.

[F1 (CpyEQ]

: Copy only the equalizer settings.

[F2 (CpyLv]

: Copy only the level settings.

[F4 (Exec] or [ENTER (YES)]

: Copy both the equalizer

and level settings.

[F6 (EXIT] or [EXIT (NO)]

: Exit without copying.

The third

HOT

The second

HOT

The second

HOT

Mixer

Amplifier

Speaker

The third

HOT

The second

HOT

Mixer

Equalizer

Amplifier

Speaker

The third

HOT

Содержание VS-1680 V-XPANDED



























































































































































































































































































Результаты поиска

Содержание VS-1680 V-XPANDED

Отзывы:

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 82 / 282

Результаты поиска

Содержание VS-1680 V-XPANDED

Отзывы: