Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 79 / 282

79
Chapter 5 Using the Digital Mixer
Chapter 5
1.
Press [SELECT (CH EDIT)] for the channel (input or
track) you wish to assign to a fader group.
2.
Press [PAGE] so that [F4] indicates “Group,” and then
press [F4 (Group)].
3.
Press [F6 (PRM.V)].
4.
Use [ ], [ ], [ ], and [ ] to move the
cursor, and use the TIME/VALUE dial to set the
parameters.
Group
Select the group (1–8) to which you wish to assign the
fader. Channels for which the same number is selected
will be assigned to the same group. Moving any fader
within the group will adjust all faders assigned to that
group.
If you select “Off,” the fader will not be assigned to any
group, and will function normally.
5.
Press [PLAY (DISPLAY)] to return to Play mode.
Selecting V-Tracks
The VS-1680 provides 16 recordable tracks per channel.
These are called “V-Tracks,” short for “Virtual Tracks.” By
using the V-Tracks, you can record up to 256 tracks per song.
To change V-Tracks, use the procedure below.
1.
Press the SELECT button for the track whose V-Track
you wish to change. The button indicator lights. The
Track Mixer screen appears in the display.
2.
Use [ ], [ ], [ ], and [ ] to move the
cursor to “V. Trk” in the Track Mixer display. Or, press
[F5 (V.Trk)]. If “V.Trk” does not appear above [F5], press
[PAGE] until it appears, and then press [F5 (V.Trk)].
3.
Use the TIME/VALUE dial to choose the V-Track you
want to use. Note, you cannot change the V-Track while
the song is playing. If the song is playing, press [STOP],
and then use the TIME/VALUE dial to choose the
V-Track.
fig.03-21
4.
Press [PLAY (DISPLAY)] to return to the Playlist display.
Using the Equalizer (EQ)
Each channel of both the Input Mixer and the Track Mixer
has a user-definable EQ. You can choose either a two-band
(Low, High), or three-band (Low, Mid, High) parametric EQ
on a channel-by-channel basis. To use the EQ, first set up EQ
settings separately for each channel. Then, while listening to
the entire mix, make final adjustments to the EQ, panning,
and level for each channel.
* While adjusting the EQ when a track is playing, you may hear
short clicks, especially if you change the EQ value very
rapidly. This is not a malfunction. To avoid any such noise,
change EQ settings slowly.
An image of fader group
(Faders cannot be moved.)
Track to be recorded or played back
Track onto which performance data is recorded
Tracks with no performance data recorded on them