manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 78 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 78

78

Chapter 5 Using the Digital Mixer

2.

Press [F5 (Fader)]. If “Fader” does not appear above [F5], 
press [PAGE] until you see “Fader” above [F5], and then 
press [F5 (Fader)].

3.

Press [F6 (PRM.V)]. The values of each fader appear in 
the display.

4.

Use [

], [

], [

], and [

] to move the 

cursor. Then use the TIME/VALUE dial to adjust each 
setting.

fig.11-21

Total Level

This adjusts the total volume level (0-127). Use the fader 
for the odd-numbered channel to change this setting.

Odd-Numbered Channel Level

This adjusts the total volume level (0-127) of the odd-
numbered (left) channel.

Even-Numbered Channel Level

This adjusts the total volume level (0-127) of the even-
numbered (right) channel.

5.

Press [PLAY (DISPLAY)] to return to the Playlist display.

Adjusting the Panning of Stereo 
Linked Channels

When Stereo Link is on, it is possible to adjust the channels’ 
overall stereo position while preserving their pan positions 
relative to each other. If you want to adjust the pan for each 
channel independently, use the following procedure.

1.

Press the SELECT button for the input or track channel 
that is linked.

2.

Press [F1 (MIX)]. If “MIX” does not appear above [F1], 
press [PAGE] until you see “MIX” above [F1], and then 
press [F1 (MIX)].

3.

Press [F6 (PRM.V)]. Each of the pan positions appears in 
the display.

4.

Use [

], [

], [

], and [

] to move the 

cursor. Then use the TIME/VALUE dial to adjust each 
setting.

fig.11-22

Mix Assign Switch

When this is set to “On”, the source at each Input 
channel is assigned directly to the MIX bus. Set this to 
“on” when you simply want to mix an input without 
actually recording it.

Total Balance

With the balance between both channels preserved, this 
adjusts the total left-right balance (L63-R63).

Odd-Numbered Channel Pan

This adjusts the balance (L63-R63) of the odd-numbered 
(left) channel.

Even Numbered Channel Pan

This adjusts the balance (L63-R63) of the even-numbered 
(right) channel.

5.

Press [PLAY (DISPLAY)] to return to the Playlist display.

Linking the Faders of Two or 
More Channels (Fader Group)

The faders of two or more channels (inputs/tracks) can be 
assigned to groups, so that when the fader of any channel is 
operated, the fader levels (volume levels) of all channels in 
that group will be adjusted as well.

When fader group settings have been made, you can adjust 
the overall volume of a group while preserving the volume 
balance of the channels included in that group.

channel

Even-Numbered Channel Level

Total Level

Odd-Numbered Channel Level

Channel

Even-Numbered Channel Pan

Total Balance

Odd-Numbered Channel Pan

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов