manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 75 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 75

75

Chapter 5 Using the Digital Mixer

Chapter 5

AUX3/AUX:

The signal at the AUX3 bus, or AUX when a second 
VS8F-2 effect card is installed in the VS-1680.

4.

Press [PLAY (DISPLAY)] to return to the Playlist display.

The AUX B jacks are set using the same method. Press [F4 
(AUX.B)] at Step 2.

Digital Out Connectors

1.

Press [EDIT/SOLO]. The Master Block is displayed.

2.

Press [F5 (DOUT1)]. If “DOUT1” does not appear above 
[F5], press [PAGE] until “DOUT1” appears above [F5], 
and then press [F5 (DOUT1)].

3.

Determine what signal is assigned to the DIGITAL OUT 
1 connector by turning the TIME/VALUE dial.

fig.11-46

DOUT1 (DIGITAL OUT 1)

This selects what signal is assigned to the DIGITAL OUT 
1 (coaxial) connector.

MST:

The signal at the MASTER jacks (MIX bus).

MON:

The signal at the MONITOR jacks.

EFX1:

The signal at the EFFECT 1 bus.

EFX2:

The signal at the EFFECT 2 bus.

AUX1/EFX3:

The signal at the AUX1 bus, or EFFECT 3 when a second 
VS8F-2 effect card is installed in the VS-1680.

AUX2/EFX4:

The signal at the AUX2 bus, or EFFECT 4 when a second 
VS8F-2 effect card is installed in the VS-1680.

AUX3/AUX:

The signal at the AUX3 bus, or AUX when a second 
VS8F-2 effect card is installed in the VS-1680.

4.

Press [PLAY (DISPLAY)] to return to the Playlist display.

The DIGITAL OUT 2 (optical) jacks are set the same way. 
Press [F6 (DOUT2)] at Step 2.

Direct Out Connectors

The signal from each track of the recorder can be assigned 
directly to each of the eight analog output jacks. This is 
convenient for transferring tracks from the VS-1680 to 
another multi-track recorder.

1.

Press [EDIT/SOLO]. The Master Block is displayed.

2.

Press [F5 (DIR)]. If “DIR” does not appear above [F5], 
press [PAGE] until “DIR” appears above [F5], and then 
press [F5 (DIR)].

3.

Use the TIME/VALUE dial to make settings for DIRECT 
OUT.

DIR OUT (DIRECT OUT)

Select Tracks to be assigned as Direct Out.

Off:

Direct out is not used.

1-8:

Tracks 1-8 are output from the analog output jacks 1-8. 
When DIRECT OUT is used, the MASTER, MONITOR 
and AUX jacks are used for the direct track outputs. The 
signals at each of the DIGITAL OUT connectors can be 
set as usual.

fig.01-08.eps

Track 1:

MASTER jack (L)

Track 2:

MASTER jack (R)

Track 3:

AUX A jack (L)

Track 4:

AUX A jack (R)

Track 5:

AUX B jack (L)

Track 6:

AUX B jack (R)

Track 7:

MONITOR jack (L)

Track 8:

MONITOR jack (R)

9-16:

Tracks 9-16 are output from the analog OUTPUT jacks 1-
8. When DIRECT OUT is used, the MASTER, MONITOR 
and AUX jacks are used for the direct track outputs. The 
signals at each of the DIGITAL OUT connectors can be 
set as usual.

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов