Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 43 / 282

43
Chapter 3 Playback Operations
Ch
apter
3
post-fader levels. The current Levels setting is labeled either
“Pre” or “Post in the lower left corner of the center portion of
the display. If the current setting is pre-fader, you will see the
indicator “Pre” in the lower left corner of the level meter
display, and the label above [F4] will be “Post”. Pressing [F4]
at this point will switch the level meter to post-fader.
[F5 (F/P)] or [F5 (Meter)]:
This switches the display from Level Meters to Fader/Pan
positions for each channel.
fig.12-07
When the middle of the display is showing faders and
panning:
• Press [F1 (LMTrk)] to view the fader and pan positions
for the Track Mixer.
• Press [F2 (LM In)] to view the fader and pan positions
for the Input Mixer.
• Press [F3 (LMAux)] to view the fader and pan positions
for the AUX and EFFECT busses.
Mixer Channel Display
To view mixer settings, press any SELECT button for an
input or track. The SELECT buttons are divided into two
rows. The top row of buttons are referred to as the “Input
SELECT buttons.” This section also contains the Stereo In
and Effects 1-4 Returns. The bottom row of buttons are
referred to as the “Track SELECT buttons.”
1.
Press Track 8 [SELECT].
2.
All mixer settings for Track 8 appear in the display. Here,
you can change all the settings for a track, including V-
Tracks, EQ, panning, and all effects routing.
fig.trackmixscreens
3.
Press Input 1 [SELECT].
4.
All mixer settings for Input 1 appear in the display. Here,
you can change all settings for an input, including phase,
EQ, panning, and all effects routing.
fig.inputmixscreens
5.
Press [PLAY(DISPLAY)] to return to the Playlist display.
Changing Track Status
You can change the status of each track by pressing the
STATUS button. The color of the status button determines
the current state of the track:
Orange: Source
The input source assigned to the channel is heard.
Blinking Red: Record Ready
The track is ready to be recorded. When blinking red,
previously recorded material on the track will be
heard.
Track Channel
Input Channel
Effect / AUX