Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 42 / 282

42
Chapter 3 Playback Operations
Selecting a Playlist Display
You can select one of four Playlist displays by holding
[SHIFT] and pressing [PLAY (DISPLAY)] to toggle between
the displays:
fig.playscreens
1.
The initial screen shows level meters, the Playlist, and
the V-Track Status grid. Hold [SHIFT] and press [PLAY
(DISPLAY)] to switch to the next Playlist display.
2.
The next screen shows level meters, an expanded
Playlist, and hides the V-Track Status grid. Hold [SHIFT]
and press [PLAY (DISPLAY)] to switch to the next
Playlist display.
3.
The next screen shows Song Information, the Playlist,
and the V-Track Status grid. Hold [SHIFT] and press
[PLAY (DISPLAY)] to switch to the next Playlist display.
4.
The final screen shows Song Information, an expanded
Playlist, and hides the V-Track Status grid. Hold [SHIFT]
and press [PLAY (DISPLAY)] to switch back to the first
Playlist display.
Function Buttons (While on the
Playlist Display)
In the Playlist display, the function buttons perform as
follows.
If “ZOOM+” does not appear above F1, press [PAGE] until it
does.
[F1 (ZOOM+)]: This enlarges, in three stages, the display of
the tracks. When a waveform is displayed, this will make it
appear taller.
fig.12-10
[F2 (ZOOM-)]: This reduces, in three stages, the display of
the tracks. When a waveform is displayed, this will make it
appear shorter.
fig.12-11
[F3 (<- ->)]: This stretches the timeline in four stages. When
a waveform is displayed, this laterally stretches out the
waveform.
fig.12-12
[F4 (-> <-)]: This shrinks the timeline in four stages. If a
waveform is displayed, this will squeeze the waveform.
fig.12-13
[F5 (WAVE)]: This displays the audio waveform for the
corresponding track as selected using the [ ] and [ ]
cursors. Press [F5 (WAVE)] once to display the waveform.
Press [F5 (WAVE)] again to remove the waveform. (Make
sure that the track you have selected contains audio.)
fig.12-14
Press [PAGE] to display the second set of functions (when
available).
[F1 (LMTrk)]: Displays levels and meters of tracks.
[F2 (LM In)]: Displays levels and meters for inputs.
[F3 (LMAux)]: Displays levels and meters of the AUX and
EFFECT Send busses.
[F4 (PRE)] / [F4 (POST)]:
This switches the display of the meter from pre-fader to post-
fader. Press [F4] to switch back and forth between pre- and
Cursor Expansion in the level direction Expansion in the time direction