Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 41 / 282

41
Chapter 3
Chapter 3 Playback Operations
The Display
Display Regions
When you first turn on the VS-1680, the following display
will appear.
fig.02-01
This display is separated into three different areas. You can
use [ ], [ ], [ ], and [ ] as well as the Time /
Value dial to change settings in each area. The currently
active area is outlined with a bold line. Press [SHIFT] and
[ ] or [ ] to change the currently active area.
Upper Part of the Display
The current time of the song is displayed here in hours,
minutes, seconds, frames, and subframes. To move the
timeline, press [ ] and [ ] to select the desired time
increment, then turn the TIME / VALUE dial to change the
value. You can also move the timeline in measure or beat
increments, or by Marker number.
fig.12-01
Center Part of the Display
The level meter is displayed here.
fig.12-03
You can switch between Pre-fader and Post-fader by turning
the TIME/VALUE dial or pressing [PAGE] until PRE or
POST appears above [F4], and by then pressing [F4].
If you hold [SHIFT] and press [PLAY (DISPLAY)] twice, the
level meter will be replaced by the Song Information display.
fig.12-02
Hold [SHIFT] and press [PLAY (DISPLAY)] twice more to
return to the level meter.
Lower Part of the Display
This area displays the Playlist.
fig.12-08
You can use the CURSOR buttons to select the track you
wish to view.
The grid at the lower right corner shows the V-Track Status.
If you don’t wish to view the V-Track Status portion of the
display, hold [SHIFT] and press [PLAY (DISPLAY)].
fig.12-09
SMPTE Time Code
Cursor Measure Beat
Marker Number
Pre-fader / Post-fader indication
Shift Lock Status
Scene Number
Synchronization Status
Locator Bank
Remaining Disk Space
Song Name
Recording Mode
Song Capacity
Comment
Sample Rate
Icon
Playlist V-track status
Current track
Tracks containing recorded data
Tracks not containing recorded data
Cursor
Track name at the cursor position
Phrase name at the cursor position/current location