manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 37 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 37

 

37

Chapter 2 Basic Operation

 

Ch
apter 

2

 

fig.02-05

 

The TIME / VALUE dial

 

Use the TIME/VALUE dial to change a value on the display. 
Turning the TIME/VALUE dial counterclockwise decreases 
a value; turning it clockwise increases it. Value changes are 
usually in single increment steps. If you hold SHIFT and turn 
the dial, values will increase or decrease by ten times (or one 
tenth) the normal rate, depending on the parameter.

 

fig.02-06

 

Most value changes can be made while the VS-1680 is 
playing. However, you must first press [STOP] before 
changing V-Tracks and before changing mixer Scenes.

 

[ENTER/YES]

 

The [ENTER (YES)] button is used to respond to an onscreen 
prompt. For example, if “Store Current?” is displayed, you 
can press [ENTER (YES)] to save your song in its current 
state. On some screens, [ENTER (YES)] will be blinking. In 
that case, pressing [ENTER (YES)] will allow you to view 
more information than is presently shown on the display. For 
example, when making changes to the EQ of a track, press 
the blinking [ENTER (YES)] button to see the pop-up EQ 
curve. To cancel the operation, press [NO].

 

[PLAY (DISPLAY)]

 

Press [PLAY (DISPLAY)] to return to the startup playlist 
display. Anytime you are in the middle of making a setting, 
and you want to get back to the startup screen, just press 
[PLAY (DISPLAY)]. It also helps to think of [PLAY 
(DISPLAY)] as an “escape” button.

 

fig.play/display

 

Setting the Internal Clock

 

The VS-1680 features an internal clock. When you record a 
performance, a time stamp consisting of the time, day, and 
month of recording is entered automatically. This allows you 
to organize recordings by day, time, and order. Use the 
following procedure to set the time and date in your VS-1680.

 

* The internal clock is battery-powered. Once you set this, the 

values are remembered each time you turn the VS-1680 off. 
However, if for any reason the time setting is in error, use the 
same steps to reset the clock.

 

1.

 

Hold [SHIFT] and press [F5 (SYSTEM)]. The System 
menu icon appears. If the System menu icon does not 
appear, press [F6 (EXIT)].

 

2.

 

Press [F2 (DATE)]. If “DATE” does not appear above 
[F2], first press [PAGE] until “DATE” appears above 
[F2], then press [F2 (DATE)].

 

3.

 

Press [

], [

], [

], and [

] to move the 

cursor and use the TIME / VALUE dial to change the 
values for each setting.

 

fig.02-01a

 

Date Edit

 

This sets the date—year, month, and day —in the Western 
time format.

Cursor

decrease

increase

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов