Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 282 | Manualshive

Страница: 282 / 282

Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 282

Concerning Copyright

The law prohibits the unauthorized recording, public performance, broadcast, sale, or distribution etc.
of a work (CD recording, video recording, broadcast, etc.) whose copyright is owned by a third party.
The VS-1680 does not implement SCMS. This design decision was made with the intent that SCMS
should not restrict the creation of original compositions which do not violate copyright law. Roland will
take no responsibility for any infringement of copyright that you may commit in using the VS-1680.
SCMS (Appendices, p. 64)

Disclaimer of liability

Roland will take no responsibility for any “direct damages,” “consequential damages,” or “any other
damages” which may result from your use of the VS-1680. These damages may include but are not
limited to the following events which can occur when using the VS-1680.

• Any loss of profit that may occur to you

• Permanent loss of your music or data

• Inability to continue using the VS-1680 itself or a connected device

About the License Agreement

The VS-1680 and its CD-R capability are designed to allow you to reproduce material to which you have
copyright, or material which the copyright owner has granted you permission to copy. Accordingly,
reproduction of music CDs or other copyrighted material without the permission of the copyright
owner, other than for your own personal use and enjoyment (private use) constitutes copyright
infringement, which may incur penalties. Consult a copyright specialist or special publications for more
detailed information on obtaining such permission from copyright holders.

• Microsoft and Windows are registered trademarks of Microsoft Corporation.

• Windows

®

95 is known officially as: “Microsoft

®

Windows

®

95 operating system.”

• Macintosh is a registered trademark of Apple Computer, Inc.

• Iomega is a registered trademark of Iomega Corporation.

• ZIP is a trademark of Iomega Corporation.

• All product names mentioned in this document are trademarks or registered trademarks of their respective

owners.

2780US

«
...
280
281
282

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов