manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 244 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 244

244

Chapter 21 System and Global Settings

fig.12-17

1.

Hold [SHIFT] and press [F5 (SYSTEM)]. The System 
Menu icon is displayed. If the System Menu icon does 
not appear, press [F6 (EXIT)].

2.

Press [F1 (SYSPM)]. If “SYSPM” does not appear above 
[F1], first press [PAGE] until “SYSPM” appears, and then 
press [F1 (SYSPM)].

3.

Use [

], [

], [

], and [

] to move the 

cursor to “Remain Display.” If “Remain Display” is not 
displayed, press [F1 (Prm1)].

4.

Use the TIME/VALUE dial to change the setting for the 
Remain Display.

Remain Display (Remaining Display)

This selects the units of measurements in which the 
remaining drive space is shown.

Time:

The remaining time for recording is shown in minutes 
and seconds.

CapaMB:

The remaining time for recording is shown in available 
megabytes of drive space.

Capa %:

The remaining time for recording is shown as a 
percentage of total drive space.

Event:

This shows the remaining number of events available for 
recording and mixing.

5.

Press [PLAY (DISPLAY)] to return to the Playlist display.

Foot Switch Settings

You can choose how the foot switch functions when an 
optional foot switch—such as the Roland DP-2 or BOSS FS-
5U—is connected to the FOOT SWITCH jack.

1.

Hold [SHIFT] and press [F5 (SYSTEM)]. The System 
Menu icon is displayed. If the System Menu icon does 
not appear, press [F6 (EXIT)].

2.

Press [F1 (SYSPM)]. If “SYSPM” does not appear above 
[F1], first press [PAGE] until “SYSPM” appears, and then 
press [F1 (SYSPM)].

3.

Use [

], [

], [

], and [

] to move the 

cursor to “Foot Sw.” If “Foot Sw” is not displayed, press 
[F1 (Prm1)].

4.

Use the TIME/VALUE dial to change the setting for Foot 
Switch.

Play/Stop:

Repeats playback and stop each time the foot switch is 
pressed.

Record:

Performs the same function as [REC]. Use this setting for 
performing punch-ins and -outs using a foot switch.

TapMarker:

Performs the same function as [TAP]. Pressing the foot 
switch places a marker at the current position of the 
song.

Next:

Performs the same function as [NEXT]. Moves to the 
beginning or end of the next phrase each time the foot 
switch is pressed.

Previous:

Performs the same function as [PREVIOUS]. Moves to 
the beginning or end of the previous phrase each time 
the foot switch is pressed.

GPI:

Controls playback and recording of the song depending 
on the GPI trigger signal received from the FOOT 
SWITCH jack.

GPI (See Appendices, p. 63)

5.

Press [PLAY (DISPLAY)] to return to the Playlist display.

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов