manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 239 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 239

 

239

 

Chapter 20

 

Chapter 20 Compatibility with Other VS Recorders

 

Drives used with Roland’s VS-880 or VS-880EX can also be 
used by the VS-1680, and song data recorded on such drives 
can be loaded by the VS-1680. Because of differences in the 
drive space and song data structures between the VS-1680 
and the VS-880 and VS-880EX, there are a number of 
precautions concerning the loading and saving of data that 
must be observed.

 

Drive Compatibility

 

VS-880/880EX 

 

→

 

 VS-1680

 

When an internal hard drive that has been used by a VS-880/
880EX is installed in the VS-1680—or when a removable 
drives used by a VS-880/880EX is installed in a drive 
connected to the VS-1680—it is recognized as a formatted 
drive. The VS-1680 can play back songs recorded on the 
VS-880/880EX. However, before you can edit VS-880/880EX 
songs on the VS-1680, or save new versions of the songs, you 
must first use the Song Import feature to convert them to VS-
1680 format.

Song data that has been saved using the Archive Copy 
procedure on the VS-880/880EX can be extracted/restored 
on the VS-1680. However, you cannot edit or re-save the 
recovered data on the VS-1680 until you have performed the 
Song Import procedure.

 

* *If you wish to edit VS-880/880EX song data with the

VS-1680, use the Song Archives Extract (p. 222) or the DAT 
Recover procedure (p. 233) first. Then convert the song into a 
VS-1680 song using Song Import.

 

VS-1680 

 

→

 

 VS-880

 

When an internal hard drive that has been used by a VS-1680 
is installed in the VS-880/880EX—or when a removable disk 
used by a VS-1680 is inserted into a drive connected to the 
VS-880/880EX—it is recognized as a formatted disk, 
provided it meets the disk partition conditions listed below. 
The VS-880 can create new songs on the drive; however, the 
VS-880/880EX cannot recognize a song recorded on the VS-
1680 unless it has been converted to VS-880 format using the 
VS-1680’s Song Export procedure (p. 241).

 

Partition space:

 

The VS-1680 drive must be 1 GB or less. If the drive has been 
initialized with Partition set to “2000 MB,” it can be still used 
with the VS-880 if the actual drive size is 1 GB or less.

 

Partition numbers:

 

Only Partitions 1 - 4 can be used. Partitions 5 - 8 cannot.

Song data that has been saved using the Archive Copy 
procedure on the VS-1680 cannot be extracted/restored by 
the VS-880/880EX.

Song data that has been saved using the DAT backup 
procedure on the VS-1680 cannot be recovered by the
VS-880/880EX.

 

VS-840/840EX 

 

↔

 

 VS-1680

 

A VS-1680 song on a Zip disk cannot be directly played or 
imported  into a VS-840/840EX. However, it can be 
converted to VS-880 format using the VS-1680’s Song Export 
feature, and then imported into a VS-840/840EX.

 

Song Import

 

You can convert songs created on a VS-880/880EX or
VS-840/840EX for use in the VS-1680 and copy them as new

songs to the current drive. This is called “Song Import.”

When VS-880/880EX song data is converted, all the data 
such as mixer settings including EQ (where applicable) and 
stereo link, system settings such as sync track and tempo 
map, locators and markers and effect settings will be copied.

VS-840/840EX song data recorded on Zip disks only includes 
the performance data (audio) and information describing the 
tracks on which the performance data is recorded. Therefore, 
mixer settings such as EQ and Stereo Link, locators and 
markers and effect settings are not imported.

 

* You can only create a song using Song Import that has the 

same sample rate and recording mode as the source song.

* If there is insufficient free space on the current drive, Song 

Import cannot be carried out.

 

The procedure for importing a playable copy of a song from 
a Zip disk is explained below. If you wish to import song 
data created by using Song Copy Archive or DAT backup, 
proceed to Step 3.

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов