Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 234 / 282

234
Chapter 19 Using a DAT Recorder (DAT Backup)
1.
Connect the VS-1680 and the DAT recorder as shown
below.
fig.09-05b
fig.09-05c
2.
Insert the tape that contains the song data into the DAT
recorder. If the song data is backed up on two or more
tapes, insert the first tape.
3.
Rewind the tape to begin playback from the beginning of
song data.
4.
Hold [SHIFT] and press [F6 (UTILITY)]. The Utility
Menu icon appears in the display.
5.
Press [PAGE] so “DATRc” appears in the display above
[F1]. Press [F1 (DATRc)].
fig.09-05a
6.
Press [ ], [ ], [ ], and [ ] to move the
cursor. Set each of the values described below.
Digital In Select
Select either “DIGIN1” (coaxial) or “DIGIN2” (optical).
Erase All Songs
When this is set to “On,” the destination drive is
initialized before the DAT Recover procedure is carried
out. This will erase all songs from the destination drive.
If you want to recover a song from DAT without erasing
any songs on the current drive, make sure this is set to
“Off.”
7.
Press [F4 (Exec)]. “STORE Current ?” appears in the
display.
8.
Press [YES] to save changes to the current song. “Please
Play DAT” appears in the display, or press [NO] to exit
the procedure.
9.
Put the DAT recorder in play. The data begins to load.
10.
If you have backed up data to multiple tapes, the
operation will pause when the end of each tape is
reached. Insert the next-numbered tape as indicated in
the display, press [YES], and start the DAT recorder
playing again.
11.
When the backup procedure is finished, “Please Stop
DAT” appears in the display. Stop the DAT recorder and
press [YES].
12.
Press [PLAY (DISPLAY)] to return to the Playlist display.
DAT recorder
Digtal Out
Optical
DAT recorder
Digital Out
Coaxial