manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 232 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 232

232

Chapter 19 Using a DAT Recorder (DAT Backup)

Saving Song Data to DAT 
(Backup)

Use the following procedure to back up song data on the 
current drive.

1.

Connect the VS-1680 and the DAT recorder as shown 
below.

fig.09-02a

fig.09-02b

2.

Set the DAT recorder so it is able to record digital signals.

* Normally the sample rate at which song data is transmitted is 

set to 48kHz. This sample rate has no relation to the sample 
rate of the song data. If your DAT recorder requires you to set 
the sample rate, set it to 48 kHz.

3.

Hold [SHIFT] and press [F6 (UTILITY)]. The Utility 
Menu icon appears in the display.

4.

Press [PAGE] so “DATBk” appears in the display above 
[F6]. Press [F6 (DATBk)]. “DAT Backup Ready?” appears 
in the display.

fig.09-03

5.

Press [YES] and “Store Current?” will be displayed. If 
you wish to save changes made to the current song, press 
[YES]; if not, press [NO].

6.

Press [

], [

], [

], and [

] to move the 

cursor to “Source Song.”

7.

Use the TIME/VALUE dial to move the cursor to the 
song you want to copy and press [F3 (MARK)]. By 
pressing [F2 (ALL)], you can place and remove marks 
from all songs. Press [F1 (SelSg)] to view a directory of 
songs. After marking songs, press [F1 (Back)].

fig.09-03a

DAT recorder

Digtal In

Optical

DAT recorder

Digital In

Coaxial

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов