manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 228 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 228

228

Chapter 18 CD Backup

CD-R Backup

1.

Select the drive (internal IDE hard drive) containing the 
source song to be backed up as the current drive.

2.

Place a blank CD-R/CD-RW disc in the CD-R/CD-RW 
drive.

3.

Press [PLAY (DISPLAY)].

4.

Hold [SHIFT] and press [F6 (UTILITY)]. The Utility 
Menu icon appears in the display.

5.

Press [PAGE] so “CDRBk” appears in the display above 
[F2]. Press [F2 (CDRBk)].

6.

Mark the songs you want to back up. Use the TIME/
VALUE dial to move the cursor to the song you want to 
back up, and then press [F3 (MARK)]. You can choose 
more than just one song to backup. By pressing [F2 
(ALL)], all songs will be marked for backup.

fig.07-14

7.

Press [F1 (SelSg)] to display a directory of songs.

fig.07-15

8.

From the song directory, press [F1 (Back)].

9.

If several CD-R/CD-RW drives are connected to the VS-
1680, you can press [F5 (SelDr)] to display a directory of 

drives. From this screen, use [

], [

], [

], and 

[

] to select the CD-R/CD-RW backup destination 

drive, then press [F1 (Back)].

fig.07-06

10.

Press [F4 (Exec)]. “Backup to CD-R (SCSI2) Sure ?” 
appears in the display.

11.

Press [YES]. (Or, press [NO] to cancel the operation.)

12.

“Store Current ?” appears in the display. Press [YES] to 
store changes made to the current song, or press [NO] if 
you don’t want to save changes made to the current 
song. If the current song is a demo song, press [NO].

13.

If the song or selected songs data will not fit on a single 
CD-R/CD-RW disc, the first disc is ejected and the 
message “Insert Disc #” (# indicating the next disc 
number in the sequence) appears in the display. Insert 
another blank CD-R/CD-RW disc and press [YES]. Write 
the disc numbers on the labels using a permanent-ink, 

If you are using a finalized CD-RW disc that contains 
data, “Erase?” appears in the display. To erase the 
existing data, press [YES]. “Erase Disc” appears and the 
contents of the CD-RW disc are erased. If you do not 
wish to erase the data, press [NO], and insert a new disc.

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов