manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 225 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 225

225

Chapter 17 Using Hard Drives

Chapter 17

1.

Hold [SHIFT] and press [F6 (UTILITY)]. The Utility 
menu icon appears in the display.

2.

Press [F5 (DrChk)]. If “DrChk” does not appear in the 
display above [F5], first press [PAGE] until “DrChk” is 
displayed, and then press [F5 (DrChk)]. A list of 
currently connected drives appears in the display.

3.

Use [

], [

], [

], and [

] to move the 

cursor. Select the drive you wish to check.

The function buttons work as shown.

[F3 (Info)]:

Displays the drive information.

[F4 (Exec)]:

Executes a Drive Check.

[F6 (EXIT)]:

Exits the screen.

fig.11-48

4.

When you have selected the drive you wish to check, 
press [F4 (Exec)]. “Drive Check ***?” appears in the 
display. “***” refers to the selected drive’s ID number.

5.

Press [YES] to continue, or if you wish to cancel Drive 
Check, press [NO].

6.

“STORE Current ?” appears in the display. Press [YES] to 
store the current song; otherwise press [NO].

During the Drive Check process, the progress of the 
operation is shown in the display. When the procedure is 
finished, the “Result List” will be displayed. If any errors 
are found, they will be reported here. Songs that do not 
contain any errors are indicated by “OK,” songs 
containing errors are indicated by “ERR.” If all of your 
songs are not displayed, use the TIME/VALUE dial to 
view the remaining songs. Do not turn off the power 
until the operation is completed. When you are finished 
viewing the result list, press [ENTER] to return to the 
main Play screen.

If Errors are Found

If the Drive Check function indicates that there are errors 
within the data on the drive, it is possible to erase the 
portion of the data that contains the error while keeping 
the remaining data as intact as possible. This can be very 
useful if you cannot access all of the songs on a drive 
because of an error in one of the songs.

This procedure does not correct the disk error. All error 
locations will be erased. This means that, depending on the 
location in which the error occurred, a take that was recorded 
may no longer be playable, Automix data may be lost, or the 
entire song itself may even be erased. If the error has 
occurred in the system or song list, the probability of this 
happening is especially high.

1.

After the Drive Check procedure is finished, press 
[ENTER]. “You’ll Lose Data” will be displayed.

2.

Press [YES] to proceed with the recover function, or press 
[NO] to cancel the operation. After the recover operation 
is finished, the results will be displayed. Songs that were 
partially altered are indicated by “Adj” and songs that 
have been deleted are indicated by “Del.”

3.

Press [ENTER] to return to the main Play screen.

Check Drive Reliability using 
Surface Scan

When initializing a hard drive, you can confirm that the read 
and write functions in all the drive partitions are operating 
correctly. This is referred to as a “Surface Scan.” If there are 
any places on the drive where the reading or writing of data 
cannot be performed, the VS-1680 registers this as unusable 
memory. The VS-1680 subsequently avoids that area during 
recording or playback.

Performing this procedure deletes all contents saved on the 
drive. Conduct this check when initializing a newly 
purchased drive or a drive that had previously been used 
with a personal computer or other device. Be sure to make a 
backup copy of any songs on the drive that you want to keep 
before carrying out a Surface Scan.

To Cancel Drive Check

You can use the following procedure to cancel the Drive 
Check.

 1. Press [EXIT]. “Cancel ?” appears in the display.

 2. Press [YES]. Drive Check is canceled.

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов