manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 223 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 223

 

223

Chapter 17 Using Hard Drives

 

Chapter 17

 

6.

 

If several external drives are connected to the VS-1680, 
press [F5 (SelDr)] to view a list of drives. Use CURSORS 
to select the drive that contains the Song Archive disk, 
and press [F1 (Back)].

 

fig.06-12

 

7.

 

Use [

] and [

] to move the cursor to “Source 

Song.”

 

8.

 

Use the TIME/VALUE dial to move the cursor to the 
song you want to extract and press [F3 (MARK)]. By 
pressing [F2 (ALL)], you can place and remove Marks 
from all songs. Press [F1 (SelSg)] to view a directory of 
songs. From here, after you have Marked the song(s) you 
want to extract, press [F1 (Back)].

 

fig.06-13

 

9.

 

Press [

] to move the cursor to “Erase All Songs” and 

use the TIME/VALUE dial to set the value.

 

Erase All Songs

 

When this is set to “On,” the destination drive is 
initialized before the Song Archive Extract procedure is 
performed. If you want to perform the extract procedure 
without erasing any songs on the destination drive, leave 
this “Off.”

 

10.

 

Press [F4 (Exec)]. A confirmation message appears in the 
display.

 

11.

 

Press [YES]. “STORE Current ?” appears in the display. 
Press [YES] if you want to save changes made to the 
current song; otherwise press [NO].

 

12.

 

Execute the Song Archives Extract. “Insert Disk # “ 
appears in the display. Insert the correct disk number 
and press [YES].

 

13.

 

When the Song Archive Extract procedure is finished, the 
screen returns to the Playlist display.

 

Hard Drive Maintenance

 

When a drive is initialized, its entire contents are 
irretrievably lost. Make sure you make backups of any songs 
on the drive that you want to keep before you use drive 
initialize.

 

* If you accidentally delete data, that data cannot be restored to 

its previous state. Roland Corporation assumes no liability 
concerning such loss of data.

 

CAUTION: If you are using a drive or disk that has been 
partitioned, you will not be able to choose a particular 
partition that you wish to initialize. When you carry out 
drive initialization, the whole drive and all of its partitions 
will be initialized at once.

 

* Be aware that initializing a drive may take some time. This is 

not a malfunction. For example, when physical format is 
turned “On,” the time required to format a 100MB Zip disk is 
approximately 10 minutes. The progress of initialization will 
be shown in the display. Be sure not to turn the power off until 
initialization is complete.

 

Drive Initialize

 

As you use a hard drive, the data on the drive is recorded 
and erased repeatedly in whatever space is currently 
available, and the data may become fragmented on the hard 
drive. When this happens, the message “Error Drive Too 
Slow” may appear in the display during certain operations. 
In order to achieve maximum performance from the drive, 
perform the Initializing (Formatting) procedure described on 
this page.

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов