Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 21

Страница: 21 / 282

Front and Rear Panels

Front & Rear

Panels

Recorder Section

fig.00-04

1. Graphic Display

This displays shows various data related to the current status of the VS-1680 during recording, playback, editing, changing its
settings, and so on.

2. FUNCTION Button

This button switches the display screen and executes operations.

The function currently assigned to each button appears at the bottom of the display.

3. PAGE (JUMP) Button

This button switches pages for screens that consist of several pages.

When [SHIFT] is held down together with this button, the Locator Jump screen is displayed.

4. PREVIEW Button

Press this button to use the Preview function that plays back a specific amount of time before and after the current location.

5. LOCATOR/SCENE Button

Pressing this button allows you to store or recall locators and markers or to store or recall Scenes (mixer settings).

Содержание VS-1680 V-XPANDED



























































































































































































































































































Результаты поиска

Содержание VS-1680 V-XPANDED

Отзывы:

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 21 / 282

Результаты поиска

Содержание VS-1680 V-XPANDED

Отзывы: