manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 204 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 204

204

Chapter 15 Using External MIDI Devices

3.

Use [

], [

], [

], and [

] to move the 

cursor to “Cntrl Local,” and use the TIME/VALUE dial 
to change the settings.

Cntrl Local (Control Local Switch)

When this is set to “Off,” actual volume levels remain 
unchanged even when the faders on the VS-1680 are 
moved. Normally, this is set to “On.” For this 
application, set the Control Local switch to “Off.”

4.

Press [PLAY (DISPLAY)] to return to the Playlist display.

MIDI Machine Control

The VS-1680 supports MIDI Machine Control (MMC). This 
means that when two VS-1680s are synchronized, or when a 
VS-1680 is synchronized with a MIDI sequencer that also 
implements MMC, operations such as Play, Stop, Fast 
Forward, etc., can be accomplished by operating only the 
Master device.

MMC messages include transport control functions and 
location information, but not actual synchronization signals. 
Synchronizing with MMC is done in a loop configuration, 
with an MMC master device sending the command to start 
the MMC slave device which, in turn, sends sync signal 
(usually MTC or MIDI Clock) back to the MMC master 
device. An MMC setup requires two-way MIDI 
communication and the proper setting of the following 
parameters on the VS-1680: Device ID, MIDI Out/Thru, 
SysEx RX, SysEx Tx, MMC Mode (Master, Slave, or Off), 
Sync Gen, and Internal Clock. For more information on these 
settings, take a look at the synchronization example using 
Cakewalk and the VS-1680 (p. 206).

MMC (See Appendices, p. 64)

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов