manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 197 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 197

197

Chapter 15 Using External MIDI Devices

Chapter 15

Creating a Sync Track Automatically

In cases where live audio was recorded into the VS-1680 
before a tempo map was set, you can automatically create a 
sync track based on two points in the song, and then convert 
the sync track to a tempo map using the method explained 
above (“Creating a Tempo Map from a Sync Track”). For this 
procedure to work you must know the exact number of 
measures in the song, and there cannot be any tempo or time 
signature changes in the song.

To automatically create a sync track, you must specify a start 
time, an end time, and the exact number of measures 
between the start time and the end time.

1.

Hold [SHIFT] and press [EXT SYNC].

2.

Press [F2 (STCnv)].

3.

Press [F4 (TI->TM)].

4.

Press [

] and [

] to move the cursor. Turn the 

TIME/VALUE dial to change each value.

fig.08-16

Start Time

Specify the actual start time.

End Time

Specify the actual end time.

Measure

Specify the exact number of measures between the Start 
Time and the End Time.

Beat

Specify the time signature (number of beats per 
measure).

5.

Press [F5 (Exec)].

6.

“Overwrite Tempo Map” appears in the display. Press 
[YES]. Or, to cancel the operation, press [NO].

7.

When the Time to SyncTrack Conversion is finished, 
press [PLAY (DISPLAY)] to return to the Playlist display.

Delaying Sync Track and Tempo Map 
Start Times

Usually, a sync track or tempo map is created with 
00h00m00s00f00 as the beginning of the song. However, 
actual audio recording doesn’t typically start at 

00h00m00s00f00. If this is the case, you can determine how 
much later recording begins after the start of the song. This 
time is referred to as the “offset.” If you want the first 
measure of the song to begin ten seconds from the beginning 
of the song, set the offset time to 00h00m10s00f00.

* During recording or playback, when the beginning of a sync 

track or tempo map is reached, the start message is sent from 
the MIDI OUT connector. This is convenient when you want 
to synchronize the VS-1680 with an external MIDI sequencer.

1.

Hold [SHIFT] and press [EXT SYNC]. The Sync/Tempo 
screen appears in the display.

2.

Use [

], [

], [

], and [

] to move the 

cursor to “Sync Offset”

3.

Use the TIME/VALUE dial to specify the offset.

4.

Press [PLAY (DISPLAY)] to return to the Playlist display.

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов