manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 193 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 193

193

Chapter 15 Using External MIDI Devices

Chapter 15

Recording MIDI Clock Messages

1.

Connect the VS-1680 and the MIDI sequencer as shown 
below:

fig.08-06

2.

Hold [SHIFT] and press [EXT SYNC]. The Sync/Tempo 
screen appears in the display.

3.

Press [F1 (STRec)].

4.

If you wish to cancel the MIDI clock data recording, 
press [EXIT]. “Wait for Start Command” appears in the 
display, and the sync track is ready to record MIDI clock 
data.

5.

Start playback of the MIDI song. The MIDI clock data is 
recorded on the sync track. While MIDI clock data is 
being recorded, the input sources can be monitored, but 
audio tracks cannot be recorded or played back. When 
the MIDI song data is finished playing back, the VS-1680 
automatically stops recording MIDI clock data.

6.

Press [PLAY (DISPLAY)] to return to the Playlist display.

Synchronized Operation

1.

Connect the VS-1680 and the MIDI sequencer as shown 
below:

fig.08-07

2.

Press [PLAY (DISPLAY)].

3.

Hold [SHIFT] and press [F5 (SYSTEM)]. The System 
menu icon appears in the display. If the System menu 
icon does not appear, press [F6 (EXIT)].

4.

Press [F4 (MIDI)]. If “MIDI” does not appear in the 
display above [F4], press [PAGE] until “MIDI” appears, 
and then press [F4 (MIDI)].

5.

Use [

], [

], [

], and [

] to move the 

cursor to “MIDI Thru,” and use the TIME/VALUE dial 
to change the setting.

MIDI Thru

This switches the function of the MIDI OUT/THRU 
connector. For this application, use “OUT.”

6.

Hold [SHIFT] and press [EXT SYNC]. The Sync/Tempo 
screen appears in the display.

fig.08-08

MIDI OUT

MIDI Sequencer

MIDI IN

MIDI Sequencer

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов