manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 190 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 190

190

Chapter 15 Using External MIDI Devices

Synchronization Using the
VS-1680 as the Master

When you want the VS-1680 to control the MIDI sequencer, 
use the following procedure:

1.

Connect the VS-1680 and the MIDI sequencer as shown 
in the following illustration.

fig.08-02

2.

Press [PLAY(DISPLAY)].

3.

Hold [SHIFT] and press [F5 (SYSTEM)]. The System 
menu icon appears in the display. If the System menu 
icon does not appear, press [F6 (EXIT)].

4.

Press [F4 (MIDI)]. If “MIDI” does not appear in the 
display above [F4], press [PAGE] until “MIDI” appears, 
and then press [F4 (MIDI)].

5.

Use[

], [

], [

], and [

] to move the 

cursor to “MIDI Thru,” and use the TIME/VALUE dial 
to change the setting.

MIDI Thru

This switches the function of the MIDI OUT/THRU 
connector. For this application, use “OUT.”

Out:

MIDI messages are sent from the VS-1680. Select this 
when sending MIDI messages such as metronome note 
messages, mixer parameter settings (Control Change or 
Exclusive messages), and/or synchronization messages.

Thru:

This echoes MIDI messages received via the MIDI IN 
connector without changing them.

6.

Hold [SHIFT] and press [EXT SYNC]. The Sync/Tempo 
screen appears in the display.

fig.08-03

7.

Use [

], [

], [

], and [

] to move the 

cursor to “Sync Gen.,” and use the TIME/VALUE dial to 
change the setting.

Sync Gen. (Sync Generator)

This setting determines what type of MIDI signal is 
generated at the MIDI OUT connector on the VS-1680. 
For this application, choose “MTC.”

Off:

No MIDI signals are transmitted.

MTC:

MIDI Time Code is transmitted.

MIDIclk:

The tempo map MIDI Clock is transmitted.

SyncTr:

The sync track MIDI Clock is transmitted.

Drop Frame and Non-Drop Frame

There are two types of time code used by NTSC format 
video recorders: drop frame, in which the time code is 
not continuous, and non-drop frame, which features 
continuous time code. In drop, which is used for NTSC 
color video formats, the first two frames of every minute 
are dropped, except for those at ten-minute intervals.

fig.08-01

Non-drop is generally used for most video and audio 
productions, since formats with continuous frames are 
easier to deal with. In contrast, in situations such as live 
broadcasts, where the time code clock must match actual 
clock time, drop frame is used.

00

01

02

03

04 05f

29

28

27

26

25

...

...

01m00s

00m59s

02 03 04 05 06 07f

29

28

27

26

25

...

...

01m00s

00m59s

Non-Drop Frame (29N)

Drop Frame (29D)

MIDI IN

MIDI Sequencer

(implements MTC)

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов