manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 187 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 187

 

187

Chapter 14 Other Useful Functions

 

Chapter 14

 

* When you release [SELECT] after adjusting the pan, the edit 

screen of that channel may appear, but the MONITOR knob 
will adjust the pan only for the channel whose [SELECT] 
button is being pressed. For example, even when the edit 
screen for Track 1 is displayed, turning the MONITOR knob 
while holding down the Track 2 [SELECT] button will adjust 
the Track 2 pan.

 

Shut Down and Restart

 

Turning Off the Power

 

The contents of any recorded song will be lost if you simply 
turn the power off. This can also damage the hard drive. To 
safely turn off the power and be sure your recorded 
performances are saved, always follow the shutdown 
procedure when you finish working with the VS-1680.

 

Shutdown (See 

 

Appendices

 

, p. 64)

 

1.

 

Hold [SHIFT] and press [STOP (SHUT/EJECT)].

 

2.

 

“SHUTDOWN/EJECT?” appears in the display. Press 
[YES].

 

3.

 

“STORE Current?” appears in the display. If you wish to 
save the current song, press [YES]. If you do not want to 
save it, or if you don’t want to save any changes to the 
song since the last time you turned on the VS-1680, press 
[NO]. 

If you have selected a demo song, press [NO] at the 
“STORE Current?” prompt—the demo songs are 
memory protected.

 

4.

 

When shut down has been completed properly, 
“PowerOFF/RESTART” appears in the display.

If you wish to restart the VS-1680 without turning off the rear 
panel POWER switch, hold [SHIFT] and press [PLAY 
(RESTART)]. This restarts the VS-1680. Restart is convenient 
when switching removable disks in drives—such as the Zip 
drive—connected to the VS-1680’s SCSI connector.

If you wish to complete the shutdown of your VS-1680 turn 
down the volume of your audio equipment, turn off the 
power of the audio equipment, then turn off the power of the 
VS-1680 with the POWER switch on the rear panel.

 

* After the power is turned off, the momentum of the hard drive 

may cause it to continue spinning for a short while. Any 
physical shock to the unit during this time may damage the 
hard drive. Avoid moving a VS-1680 with hard drive installed 
for at least 30 seconds after turning off the power.

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов