Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 182 / 282

182
Chapter 13 Mastering
To Create an Audio CD-RW Using
a Roland-Approved CD-RW Drive
You can create an audio CD using a CD-RW disc, but it is
impossible to play back audio data recorded on a CD-RW
disc using most CD players, even if the disc is finalized.
Audio data recorded on a CD-RW disc can be played back
using the “CD Player Function” on the VS-1680. Consider
using a CD-R disk instead of a CD-RW disc—CD-R discs can
be played back on a wider variety of CD players.
1.
Place a blank CD-R/CD-RW disc in the CD-R/CD-RW
drive.
2.
Hold [SHIFT] and press [F1 (SONG)]. The Song Menu
icon appears in the display.
3.
Press [PAGE] so “CD Wt” appears above [F3].
4.
Press [F3 (CD Wt)]. “CD-R Write Ready ?” appears in the
display.
5.
Press [YES].
6.
“Store Current ?” appears in the display. Press [YES]. If
you don’t want to save any changes made to the current
song, press [NO].
7.
Wait a moment for the CD-R Writer display to appear.
Press [F1 (SelTr)].
fig.07-05
8.
Select the left and right tracks from the VS-1680 that you
want written to the CD-R. Use [ ], [ ], [ ],
and [ ] and the TIME/VALUE dial to move the
cursor to the V-Track you want written as the left
channel of the CD-R, and press [F3 (Sel L)]. Move the
cursor to the V-Track you want written as the right
channel of the CD-R and press [F4 (Sel R)].
You can use [ ], and [ ] to jump from track to track,
and then use the TIME/VALUE dial to select the desired
V-Track.
9.
Press [F1 (Back)].
10.
Verify that the Length megabyte value is less than the
value for IDE Free in the lower-left corner of the display.
11.
Verify that the Length megabyte value is also less than
the value for Free—the amount of free space on the CD—
in the lower right-hand corner.
If “Blank Disc” Appears in the Display
You are attempting to use the CD Player function with a
CD-R disc that has no audio recorded on it. Insert a
commercially recorded CD or a CD-R disc that contains
a recording, and try the operation once more.
If the CD-RW disc you are using contains data, “Erase?”
appears in the display. To erase the existing data, press
[YES]. “Erase Disc” appears and all the contents of the
CD-RW disc are erased. If you do not wish to erase the
data, press [NO], and insert a new disc.
When erase is finished, “Can’t be played back with
Audio CD player” appears in the display. This is to
confirm that regular audio CD players cannot play back
an audio CD made with a CD-RW disc. Press [YES]. Or
press [NO] to cancel the procedure.
If “Blank Disc” Appears in the Display
You are attempting to use the CD Player function with a
CD-R disc that has no audio recorded on it. Insert a
commercially recorded CD or a CD-R disc that contains
a recording, and try the operation once more.