Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 178 / 282

178
Chapter 13 CD-RW and Mastering
* Due to audio CD standards, songs on a CD must be at least
four seconds long. Thus, you cannot set two CD track markers
within four seconds of each other. If you attempt to do this,
“Can’t Set Marker” appears in the display, and the process
cannot be carried out. Make sure your CD markers are at least
four seconds apart.
The placement of a CD track marker in a VS-1680 song sends
a command to the CD-R to increment the track number on
the CD-R disc by one. It is not possible to create a CD-R with
non-sequential track numbers, or to skip track numbers.
Do all your editing first. Use Track Cut and Track Insert to
create exactly the desired transitions between songs. If you
place all your CD track markers and then use Track Cut or
Track Insert, you will need to go back and re-do all your
markers.
Once you are completely satisfied with the timing and
transitions between songs, place your CD track markers.
Check them by pressing [NEXT] then [PLAY]. If you need to
erase a marker, press [CLEAR]+[SONG]+[TAP].
If you are only recording one song to the CD-R, it is not
necessary to place any CD track markers, whether or not
Finalize is on or off.
Writing Songs to CD-R Discs
1.
Make sure that the CD-R/CD-RW drive is properly
connected (see p. 175).
2.
Place a blank CD-R disc in the CD-R/CD-RW drive.
3.
Press [PLAY(DISPLAY)].
4.
Hold [SHIFT] and press [F1 (SONG)]. The Song Menu
icon appears in the display.
5.
Press [PAGE] so “CD Wt” appears in the display above
[F3].
6.
Press [F3 (CD Wt)].
7.
“CD-R Write Ready ?” appears in the display. Press
[YES].
8.
“Store Current ?” appears in the display. Press [YES]. If
you don’t want to save any changes made to the current
song, press [NO].
9.
Wait a moment for the CD-R Writer display to appear.
Press [F1 (SelTr)].
Beginning of Song #1 No CD marker is needed Becomes CD Track 1
Beginning of Song #2 CD Track Marker # 000c Becomes CD Track 2
Beginning of Song #3 CD Track Marker # 001c Becomes CD Track 3
Beginning of Song #4 CD Track Marker # 002c Becomes CD Track 4
and so on...
CD Track Number Tip
When setting up CD track markers for a full length CD-R, it’s easy to get confused by the discontinuity between the CD track
marker number and the actual CD track number created. During the CD-R writing process, regular markers—placed by
pressing [TAP]—are ignored by the CD-R. By placing two regular markers during the first song, the subsequent CD track
markers match the actual CD track numbers which they will create.
Before using the CD Write function, place two “dummy” markers somewhere during the first song. It doesn’t matter where
the two dummy markers are placed, as they will be ignored by the CD-R. The first two marker numbers are 000 and 001.
Place the next marker using [PLAY (DISPLAY)]+[TAP] (to indicate a CD track number) where you want the second track of
the CD to begin. This will be marker 002c.
Beginning of Song #1 No CD marker is needed Becomes CD Track 1
Middle of Song #1 Normal Marker #000 (ignored by CD-R)
Middle of Song #1 Normal Marker #001 (ignored by CD-R)
Beginning of Song #2 CD Track Marker # 002c Becomes CD Track 2
Beginning of Song #3 CD Track Marker # 003c Becomes CD Track 3
(etc.)