manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 171 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 171

171

Chapter 13 CD-RW and Mastering

Chapter 13

Mastering Tracks Status 
Shortcuts

Shortcut 1

1.

Press [MASTER].

2.

Press [PAGE] so that [F6] indicates “M.Tr,” and then 
press [F6 (M.Tr)].

3.

Select the status of the mastering tracks. Make sure that 
the cursor is located at “Stat,” and then turn the 
TIME/VALUE dial.

4.

Select the mastering V-Tracks. Use [

] or [

] to 

move the cursor to “L:” or “R:,” and turn the TIME/
VALUE dial to select the desired V-Track.

Shortcut 2

The “Status” of the mastering tracks can also be set as 

follows.

1.

Press [PLAY (DISPLAY)].

2.

Press [PAGE] so that [F6] indicates “M

→

***” (*** is either 

Rec, Ply, or Off).

fig.2-11

3.

The mastering tracks can be turned off, or set to record or 

play back. [F6] toggles between these settings. The 

indicator above [F6] shows the setting that will be 

selected when you next press [F6], as indicated by an 

arrow. The current status of the mastering tracks can be 

viewed in the level meter in the display. For this 

example, press [F6] until “M

→

Off” appears above [F6]. 

Press [F6] once more to select this setting.

fig.2-12.e

Off

Record wait Status

Playback Status

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов