manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 156 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 156

156

Chapter 10 Track and Phrase Editing

[F4 (Ins)]:

 Insert a space at the cursor location.

[F5 (Write)]:

 Finalize the take name and exit the 

window.

[F6 (EXIT)]:

 Exit the window without finalizing the take 

name.

9.

After assigning the name, press [F5 (Write)]. A message 

will ask whether you also want to change the names of 

the phrases used by that take.

10.

If you also want to change the name of any phrase that 

plays the take, press [YES]. If you press [NO], the phrase 

names will remain the same, and only the take name will 

change.

Phrase names will have an incrementing number added to 
the end of the take name. For example, if the take is named 
“AcousticGuitarLR,” the phrase names will be 
“AcousticGuitar-1,” “AcousticGuitar-2,” etc.

11.

When the display indicates “Complete,” hold down 

[SHIFT] and press [STORE (ZERO)].

12.

Press [YES]. The song will be saved.

13.

Press [PLAY (DISPLAY)]. You will return to Play mode.

Deleting a Take (Delete)

A deleted take cannot be recovered using the Undo function.

1.

Press [PLAY (DISPLAY)].

2.

Hold down [SHIFT] and press [F2 (TRACK)].

3.

Press [F1 (Tr/Ph)] so that the Phrase Edit Menu appears.

4.

Press [PAGE] so that [F3] indicates “New,” and then 

press [F3 (New)].

5.

Press [F1 (Take)].

6.

Use the TIME/VALUE dial to move the cursor to the 

take you wish to delete.

7.

Press [F5 (Del)]. A message will ask you to confirm.

8.

If you wish to delete the take, press [YES]. If you press 

[NO], you will return to Step 6 without deleting the take.

9.

When the take has been deleted, the display will indicate 

“Complete.” Press [PLAY (DISPLAY)]. You will return to 

Play mode.

When a take is deleted, all phrases it uses are also  deleted.

When you delete a take, the song will be stored 
automatically.

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов