manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 154 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 154

154

Chapter 10 Track and Phrase Editing

fig.04-56a

Phrase New

You can create a new phrase any time you wish from any 
recorded take in the song.

Creating a New Phrase

1.

Press [PLAY (DISPLAY)].

2.

Hold down [SHIFT] and press [F2 (TRACK)].

3.

Press [F1 (Tr/Ph)] so that the Phrase Edit Menu appears.

4.

Press [PAGE] so that [F3] indicates “New,” and then 

press [F3 (New)].

5.

Press [F1 (Take)].

6.

At this time, pressing [F3 (Sort)] will switch the order in 

which the takes are sorted, cycling through the following 

choices.

HIST

:

The order in which the takes were recorded

V.Tr

:

The order of the V-Tracks on which the takes 

are recorded

NAME

:

The alphabetical order of the take names

fig.6-05.e

7.

Use the TIME/VALUE dial to select the take that will be 

the basis of the newly created phrase.

8.

Press [F4 (Sel)] or [ENTER (YES)].

9.

Use [

], [

], [

], and [

] to move the 

cursor, and use the TIME/VALUE dial to set the 

parameters.

TO

Time

Phrase 2

Phrase 2

Phrase 1

Phrase 1

The order in which the takes were recorded

The order of the V-tracks on which the takes are recorded

The alphabetical order of the take names

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов